X-CNC 1/4″ 2-Flute Ball Nose Carbide End Mill

SKU: EM-C2BN14

Original price was: $42.99.Current price is: $35.99.

This X-CNC 1/4″ 2-flute ball nose carbide end mill is a solid carbide, bright-finish CNC router bit on a 1/4″ shank, made in the USA, for 3D carving, contouring and relief. The ball nose leaves a smooth curve, the two flutes clear chips, and the 1/4″ shank is stiffer than a 1/8″ ball when the work gets larger. It fits desktop and small-shop machines that take a 1/4″ collet, including Shapeoko-class routers.

Family Owned. Slightly Twisted.

Real people who actually know drill bits pick up the phone.

Fast Shipping Nationwide

Most orders are out the door the same or next business day.

Built for Steel, Not Shelves

Shop-grade bits for people who drill all day and break stuff for a living.

Stumped? Call the Bit Experts.

Tell us the material and the job, and we'll get you the right bit. 800-350-8665.

1/4″ 2-Flute Ball Nose Carbide CNC Router Bit, Made in USA

This X-CNC 1/4″ 2-flute ball nose carbide end mill is a solid carbide, bright-finish CNC router bit on a 1/4″ shank, made in the USA, for 3D carving, contouring and relief. The ball end blends curves instead of leaving a square step. The two flutes clear chips so the tip keeps cutting.

Why the 1/4″ ball instead of the 1/8″

The 1/8″ ball is the detail tool. This 1/4″ ball is the stiffer one for larger relief, deeper carving and faster finishing on a desktop machine. Length of cut is 3/4″ on a 2-1/2″ overall length. If you need tighter inside radii, use the X-CNC 1/8″ 2-flute ball nose. If you need a flat floor, use a square end mill. At DrillBitWarehouse.com we are just a BIT more twisted about putting the right diameter on the job, not the only diameter we had on the shelf.

What it cuts

Use it on wood, MDF, sign material, many plastics, and light aluminum or other non-ferrous work. It is a general-purpose 2-flute ball, not a dedicated aluminum-geometry tool. For regular aluminum milling, use the X-CNC 1/4″ 2-flute ZrN aluminum end mill.

Shank and machine fit

The shank is 1/4″. It fits a 1/4″ collet on desktop CNC routers and small mills, including Shapeoko-class machines with a 1/4″ collet. It will not fit a 1/8″ collet.

Specifications

Series X-CNC
Cut diameter 1/4″ (0.250″)
Shank 1/4″ (0.250″)
Length of cut 3/4″
Overall length 2-1/2″
Flutes 2
End style Ball nose, center cutting
Helix 30°, upcut
Coating Uncoated, bright
Material Sub-micron grain solid carbide
Origin Made in USA
Sold Individually

How to use it

Seat the shank fully in a 1/4″ collet, short of the flutes. Use it for finishing and 3D work with a moderate depth of cut, then a light finishing pass. Do not dwell the ball in one spot. Wear eye protection.

Frequently asked questions

Will this 1/4″ ball nose fit a Shapeoko or similar desktop CNC?

Yes, if your machine has a 1/4″ collet. The shank is 1/4″. It will not fit a 1/8″ collet.

When should I use the 1/4″ ball instead of the 1/8″ ball?

Use the 1/4″ when the carving is larger and you want a stiffer tool and a faster pass. Use the 1/8″ when the inside radius is tight or the detail is small.

Is this an upcut bit?

Yes. The 30° right-hand spiral is an upcut, so chips pull up and out of the cut. For a clean top face on veneer or laminate, use the 1/4″ downcut router bit.

Can I use it in aluminum?

Light aluminum work is in range with conservative feeds. For regular aluminum milling, use the X-CNC 1/4″ 2-flute ZrN aluminum end mill.

Just a BIT more twisted. Questions? Call 1-800-350-8665.

Additional information

Need help choosing the right product?

Our product team can help you compare sizes, shanks, and applications before you order.

You may also like

X-CNC 1/8 inch 2-flute ball nose carbide CNC router bit, 1/8 inch shank, bright finish, made in USA
New
-18%

Original price was: $21.99.Current price is: $17.99.

X-CNC 1/8 inch 2-flute square AlTiN carbide end mill, 1/8 inch shank, made in USA
New
-18%

Original price was: $21.99.Current price is: $17.99.

X-CNC 1/8 inch 90 degree carbide chamfer and V-groove bit, 1/8 inch shank, bright finish, made in USA
New
-16%

Original price was: $30.99.Current price is: $25.99.

X-CNC 1/4 inch 90 degree carbide chamfer and V-groove bit, AlTiN coating, 1/4 inch shank, made in USA
New
-17%

Original price was: $59.99.Current price is: $49.99.