FAST SPIRAL CONSTRUCTION REAMER – USA

Price range: $58.12 through $304.78

USA made hole expansion reamer with spiral flutes and 3-flat shank for fast, aggressive hole enlargement in structural steel and plate.

19 sizes from 5/16″ through 1-1/2″. 1/2″ shank through 1-1/4″, 3/4″ shank on the larger sizes.

Family Owned. Slightly Twisted.

Real people who actually know drill bits pick up the phone.

Fast Shipping Nationwide

Most orders are out the door the same or next business day.

Built for Steel, Not Shelves

Shop-grade bits for people who drill all day and break stuff for a living.

Stumped? Call the Bit Experts.

Tell us the material and the job, and we'll get you the right bit. 800-350-8665.

Professional USA Made Construction Reamers – SteelHog

Fast Construction Spiral Reamers are engineered for aggressive hole enlargement in structural steel, plate, and heavy fabrication. Designed with a fast spiral flute that pulls chips efficiently and cuts hard without grabbing, these tools outperform standard straight flute reamers in tough applications.

3-flat shank design locks into the chuck and prevents slipping under load—critical when you’re pushing through thick material.

Manufactured from high-grade tungsten tool steel and surface treated for lubricity and wear resistance, these reamers are built to stay sharp and keep cutting. When lesser reamers roll over, these stay aggressive and keep cutting.


Why These Stand Out

  • Fast Spiral Flute Design – pulls chips out, cuts smoother, reduces binding
  • 3-Flat Shank – no slipping in the chuck under heavy torque
  • Aggressive Expansion Geometry – opens holes quickly without chatter
  • Surface Treated for Lubricity – runs cooler, cuts cleaner
  • Made in USA – built for production and field use

Built For

  • Structural steel
  • Truck frames
  • Rail cars
  • Bridge work
  • Pressure vessels
  • Heavy fabrication

Shank Info

Sizes:

  • 5/16″ through 1-1/2″ available
  • Larger sizes run on 3/4″ shanks (see chart)

Construction Reamer Size Chart

All 19 sizes, smallest to largest. Drill or punch a hole at least the minimum start size, and the reamer opens it to the full diameter.

Reamer Decimal Overall Min. Start Hole Point Dia. Shank
5/16″ .3125 4-5/8″ 3/16″ 0.182 5/16″
3/8″ .3750 4-5/8″ 1/4″ 0.244 3/8″
7/16″ .4375 5-7/8″ 9/32″ 0.26 7/16″
1/2″ .5000 5-7/8″ 5/16″ 0.291 1/2″
9/16″ .5625 5-7/8″ 5/16″ 0.291 1/2″
5/8″ .6250 6-3/8″ 11/32″ 0.323 1/2″
11/16″ .6875 6-3/8″ 13/32″ 0.385 1/2″
3/4″ .7500 6-7/8″ 7/16″ 0.416 1/2″
13/16″ .8125 6-7/8″ 1/2″ 0.478 1/2″
7/8″ .8750 6-7/8″ 17/32″ 0.51 1/2″
Reamer Decimal Overall Min. Start Hole Point Dia. Shank
15/16″ .9375 6-7/8″ 19/32″ 0.595 1/2″
1″ 1.0000 6-7/8″ 5/8″ 0.604 1/2″
1-1/16″ 1.0625 6-7/8″ 21/32″ 0.635 1/2″
1-1/8″ 1.1250 6-7/8″ 11/16″ 0.67 1/2″
1-3/16″ 1.1875 6-7/8″ 3/4″ 0.71 1/2″
1-1/4″ 1.2500 6-7/8″ 3/4″ 0.729 1/2″
1-5/16″ 1.3125 6-7/8″ 13/16″ 0.785 3/4″
1-3/8″ 1.3750 6-7/8″ 7/8″ 0.82 3/4″
1-1/2″ 1.5000 6-7/8″ 15/16″ 0.9 3/4″

This reamer is especially designed for the reaming of structural steel plates commonly found in truck frames, rail cars, bridges and pressure vessels.

Pro Series Reamer Sizing Chart

This is a professional series high performance tool Made proudly in the USA.

The fast spiral design makes this the most aggressive reamer you can buy. Made in USA

Specifications

Type Fast spiral flute construction (car) reamer
Material Tungsten tool steel, gold surface treated
Sizes 5/16″ through 1-1/2″, 19 sizes by 16ths (no 1-7/16″)
Shank 3-flat. 5/16″ to 7/16″ match the reamer size, 1/2″ to 1-1/4″ have a 1/2″ shank, 1-5/16″ to 1-1/2″ have a 3/4″ shank
Overall Length 4-5/8″ to 6-7/8″ depending on size
Made In USA

Applications

  • Opening up and aligning bolt holes in stacked structural steel plate
  • Steel erection and bridge work where holes don’t line up in the field
  • Truck frame, trailer and rail car repair
  • Pressure vessel and heavy fabrication shops
  • Enlarging punched or drilled holes to the next bolt size

Use It Right

  • A construction reamer enlarges an existing hole. Start from a hole at least the minimum start size in the chart.
  • Run it in a magnetic drill, drill press or a heavy-duty hand drill with a chuck that grips the 3-flat shank.
  • Use low speed and steady feed, and keep cutting fluid on the flutes in steel.
  • Clamp or bolt the plates together so the stack can’t shift while you ream.
  • Made for structural steel and plate. It is not a finishing reamer for tight-tolerance machined bores, and not for hardened steel.

FAQ

What is a construction reamer?
A tapered-point reamer that steps into an existing hole and opens it to full size. Ironworkers and fabricators use them to line up and enlarge bolt holes in structural steel. They are also called car reamers, and do the same job as a bridge reamer.

Spiral flute or straight flute reamer?
The fast spiral flute pulls chips up and out of the hole, so it cuts faster and binds less in thick stacks than a straight flute.

What size hole do I need to start with?
Check the Min. Start Hole column in the chart. For example, the 13/16″ reamer starts from a 1/2″ hole.

Will it fit my drill?
The 5/16″ through 1-1/4″ sizes fit a 1/2″ chuck. The 1-5/16″, 1-3/8″ and 1-1/2″ sizes have a 3/4″ shank for a mag drill or larger chuck.

Not sure which size you need for your bolt holes? Call DrillBitWarehouse.com at 800-350-8665. We talk reamers and drill bits all day and can get you the right one.

Additional information

Weight .02 lbs
Reamer Diameter

5/16" Fast Spiral Car Reamer, 3/8" Fast Spiral Car Reamer, 7/16" Fast Spiral Car Reamer, 1/2" Fast Spiral Car Reamer, 9/16" Fast Spiral Car Reamer, 5/8" Fast Spiral Car Reamer, 11/16" Fast Spiral Car Reamer, 3/4" Fast Spiral Car Reamer, 13/16" Fast Spiral Car Reamer, 7/8" Fast Spiral Car Reamer, 15/16" Fast Spiral Car Reamer, 1" Fast Spiral Car Reamer, 1-1/16" Fast Spiral Car Reamer, 1-1/8" Fast Spiral Car Reamer, 1-3/16" Fast Spiral Car Reamer, 1-1/4" Fast Spiral Car Reamer, 1-5/16" Fast Spiral Car Reamer, 1-3/8" Fast Spiral Car Reamer, 1-1/2" Fast Spiral Car Reamer

Need help choosing the right product?

Our product team can help you compare sizes, shanks, and applications before you order.

You may also like

Cobalt Step Drill Bit for hardened steel
-30%

Price range: $42.12 through $79.98

6 flute HSS Countersink made in USA
-40%

Price range: $12.96 through $112.23

HEX SHANK TITANIUM STEP DRILL SET – SPIRAL FLUTED
-39%

Original price was: $75.98.Current price is: $45.98.

High Speed Steel Jumbo Drill Bit Set Silver and Deming
-18%

Original price was: $449.88.Current price is: $369.98.