Made in USA
$5.40 – $33.10Price range: $5.40 through $33.10
Left-hand Hi-Moly jobber drills for reverse drilling and broken bolt removal. 135° split point, jobber length, made in the USA. Sold individually, 1/16″ through 1/2″.
Family Owned. Slightly Twisted.
Real people who actually know drill bits pick up the phone.
Fast Shipping Nationwide
Most orders are out the door the same or next business day.
Built for Steel, Not Shelves
Shop-grade bits for people who drill all day and break stuff for a living.
Stumped? Call the Bit Experts.
Tell us the material and the job, and we'll get you the right bit. 800-350-8665.
Made in the USA.
A standard drill bit cuts clockwise, the same direction that tightens a right-hand bolt. A left-hand bit is ground the opposite way, so it cuts counter-clockwise with the drill in reverse. When you drill into a broken bolt or seized stud, every turn pushes in the loosening direction. Once the bit bites and the heat and vibration break the corrosion loose, the fastener often spins right out while you’re still drilling. You don’t need an extractor, you don’t risk snapping one off in the hole, and the job takes minutes instead of an afternoon.
If the fastener doesn’t come out on its own, you haven’t lost anything. You’re left with a straight, centered pilot hole, which is exactly what an extractor needs to grip.
These bits are made from Hi-Molybdenum high-speed steel. Molybdenum adds hardness and heat resistance over standard carbon tool steel, so the edge holds up when you’re drilling into hardened bolt material where the friction builds fast. The 135° split point cuts on contact and resists walking, which matters on a sheared bolt face that’s rarely flat or square. The jobber length gives you enough flute to reach fasteners sunk in a bore or behind a bracket, while staying short enough to keep the bit stiff and on center.
Each bit is sold on its own, in sizes from 1/16″ to 1/2″, so you buy just the sizes you use and replace them one at a time. Pick your size from the selector.
Do I need a special drill to use these?
No. Any drill with a reverse setting works. These are reverse drill bits, so set the drill to reverse before you start. Running it forward will just rub and dull the bit. They’re made for broken bolt removal and any job that needs counter-clockwise drilling.
What size should I use on a broken bolt?
Start smaller than the bolt’s minor (root) diameter so you don’t damage the threads in the hole. A common starting point is about half the bolt diameter, then step up if needed.
Will it always back the bolt out?
Not always. It often works on bolts that sheared from overload, but badly rusted or thread-locked fasteners may still need heat, penetrating oil or an extractor. Either way, the hole you drill is the right pilot for one.
Will these drill hardened bolts like Grade 8?
Hi-Moly HSS handles mild and medium-carbon steel well. On hardened fasteners, use low speed, firm pressure and cutting oil, and expect shorter edge life.
Do I need to center punch first?
Usually not. The 135° split point is designed to start without walking. On a jagged break, filing the face flat first helps.
| Weight | 0.09 lbs |
|---|---|
| Left Hand Jobber drill size | 1/16" x 1-7/8" Left Hand Jobber Drill Bit, 5/64" x 2" Left Hand Jobber Drill Bit, 3/32" x 2-1/4" Left Hand Jobber Drill Bit, 7/64" x 2-5/8" Left Hand Jobber Drill Bit, 1/8" x 2-3/4" Left Hand Jobber Drill Bit, 9/64" x 2-7/8" Left Hand Jobber Drill Bit, 5/32" x 3-1/8" Left Hand Jobber Drill Bit, 11/64" x 3-1/4" Left Hand Jobber Drill Bit, 3/16" x 3-1/2" Left Hand Jobber Drill Bit, 13/64" x 3-5/8" Left Hand Jobber Drill Bit, 7/32" x 3-3/4" Left Hand Jobber Drill Bit, 15/64" x 3-7/8" Left Hand Jobber Drill Bit, 1/4" x 4" Left Hand Jobber Drill Bit, 17/64" x 4-1/8" Left Hand Jobber Drill Bit, 9/32" x 4-1/4" Left Hand Jobber Drill Bit, 19/64" x 4-3/8" Left Hand Jobber Drill Bit, 5/16" x 4-1/2" Left Hand Jobber Drill Bit, 21/64" x 4-5/8" Left Hand Jobber Drill Bit, 11/32" x 4-3/4" Left Hand Jobber Drill Bit, 23/64" x 4-7/8" Left Hand Jobber Drill Bit, 3/8" x 5" Left Hand Jobber Drill Bit, 25/64" x 5-1/8" Left Hand Jobber Drill Bit, 13/32" x 5-1/4" Left Hand Jobber Drill Bit, 27/64" x 5-3/8" Left Hand Jobber Drill Bit, 7/16" x 5-1/2" Left Hand Jobber Drill Bit, 29/64" x 5-5/8" Left Hand Jobber Drill Bit, 31/64" x 5-7/8" Left Hand Jobber Drill Bit, 1/2" x 6" Left Hand Jobber Drill Bit |
Need help choosing the right product?
Our product team can help you compare sizes, shanks, and applications before you order.
$2.34 – $14.78Price range: $2.34 through $14.78
$12.84 – $67.44Price range: $12.84 through $67.44
$0.66 – $11.98Price range: $0.66 through $11.98
$12.54 – $218.63Price range: $12.54 through $218.63