$58.12 – $304.78Price range: $58.12 through $304.78
USA made hole expansion reamer with spiral flutes and 3-flat shank for fast, aggressive hole enlargement in structural steel and plate.
19 sizes from 5/16″ through 1-1/2″. 1/2″ shank through 1-1/4″, 3/4″ shank on the larger sizes.
Family Owned. Slightly Twisted.
Real people who actually know drill bits pick up the phone.
Fast Shipping Nationwide
Most orders are out the door the same or next business day.
Built for Steel, Not Shelves
Shop-grade bits for people who drill all day and break stuff for a living.
Stumped? Call the Bit Experts.
Tell us the material and the job, and we'll get you the right bit. 800-350-8665.
Fast Construction Spiral Reamers are engineered for aggressive hole enlargement in structural steel, plate, and heavy fabrication. Designed with a fast spiral flute that pulls chips efficiently and cuts hard without grabbing, these tools outperform standard straight flute reamers in tough applications.
3-flat shank design locks into the chuck and prevents slipping under load—critical when you’re pushing through thick material.
Manufactured from high-grade tungsten tool steel and surface treated for lubricity and wear resistance, these reamers are built to stay sharp and keep cutting. When lesser reamers roll over, these stay aggressive and keep cutting.
Sizes:
All 19 sizes, smallest to largest. Drill or punch a hole at least the minimum start size, and the reamer opens it to the full diameter.
| Reamer | Decimal | Overall | Min. Start Hole | Point Dia. | Shank |
|---|---|---|---|---|---|
| 5/16″ | .3125 | 4-5/8″ | 3/16″ | 0.182 | 5/16″ |
| 3/8″ | .3750 | 4-5/8″ | 1/4″ | 0.244 | 3/8″ |
| 7/16″ | .4375 | 5-7/8″ | 9/32″ | 0.26 | 7/16″ |
| 1/2″ | .5000 | 5-7/8″ | 5/16″ | 0.291 | 1/2″ |
| 9/16″ | .5625 | 5-7/8″ | 5/16″ | 0.291 | 1/2″ |
| 5/8″ | .6250 | 6-3/8″ | 11/32″ | 0.323 | 1/2″ |
| 11/16″ | .6875 | 6-3/8″ | 13/32″ | 0.385 | 1/2″ |
| 3/4″ | .7500 | 6-7/8″ | 7/16″ | 0.416 | 1/2″ |
| 13/16″ | .8125 | 6-7/8″ | 1/2″ | 0.478 | 1/2″ |
| 7/8″ | .8750 | 6-7/8″ | 17/32″ | 0.51 | 1/2″ |
| Reamer | Decimal | Overall | Min. Start Hole | Point Dia. | Shank |
|---|---|---|---|---|---|
| 15/16″ | .9375 | 6-7/8″ | 19/32″ | 0.595 | 1/2″ |
| 1″ | 1.0000 | 6-7/8″ | 5/8″ | 0.604 | 1/2″ |
| 1-1/16″ | 1.0625 | 6-7/8″ | 21/32″ | 0.635 | 1/2″ |
| 1-1/8″ | 1.1250 | 6-7/8″ | 11/16″ | 0.67 | 1/2″ |
| 1-3/16″ | 1.1875 | 6-7/8″ | 3/4″ | 0.71 | 1/2″ |
| 1-1/4″ | 1.2500 | 6-7/8″ | 3/4″ | 0.729 | 1/2″ |
| 1-5/16″ | 1.3125 | 6-7/8″ | 13/16″ | 0.785 | 3/4″ |
| 1-3/8″ | 1.3750 | 6-7/8″ | 7/8″ | 0.82 | 3/4″ |
| 1-1/2″ | 1.5000 | 6-7/8″ | 15/16″ | 0.9 | 3/4″ |
This reamer is especially designed for the reaming of structural steel plates commonly found in truck frames, rail cars, bridges and pressure vessels.
This is a professional series high performance tool Made proudly in the USA.
The fast spiral design makes this the most aggressive reamer you can buy. Made in USA
| Type | Fast spiral flute construction (car) reamer |
| Material | Tungsten tool steel, gold surface treated |
| Sizes | 5/16″ through 1-1/2″, 19 sizes by 16ths (no 1-7/16″) |
| Shank | 3-flat. 5/16″ to 7/16″ match the reamer size, 1/2″ to 1-1/4″ have a 1/2″ shank, 1-5/16″ to 1-1/2″ have a 3/4″ shank |
| Overall Length | 4-5/8″ to 6-7/8″ depending on size |
| Made In | USA |
What is a construction reamer?
A tapered-point reamer that steps into an existing hole and opens it to full size. Ironworkers and fabricators use them to line up and enlarge bolt holes in structural steel. They are also called car reamers, and do the same job as a bridge reamer.
Spiral flute or straight flute reamer?
The fast spiral flute pulls chips up and out of the hole, so it cuts faster and binds less in thick stacks than a straight flute.
What size hole do I need to start with?
Check the Min. Start Hole column in the chart. For example, the 13/16″ reamer starts from a 1/2″ hole.
Will it fit my drill?
The 5/16″ through 1-1/4″ sizes fit a 1/2″ chuck. The 1-5/16″, 1-3/8″ and 1-1/2″ sizes have a 3/4″ shank for a mag drill or larger chuck.
Not sure which size you need for your bolt holes? Call DrillBitWarehouse.com at 800-350-8665. We talk reamers and drill bits all day and can get you the right one.
| Weight | .02 lbs |
|---|---|
| Reamer Diameter | 5/16" Fast Spiral Car Reamer, 3/8" Fast Spiral Car Reamer, 7/16" Fast Spiral Car Reamer, 1/2" Fast Spiral Car Reamer, 9/16" Fast Spiral Car Reamer, 5/8" Fast Spiral Car Reamer, 11/16" Fast Spiral Car Reamer, 3/4" Fast Spiral Car Reamer, 13/16" Fast Spiral Car Reamer, 7/8" Fast Spiral Car Reamer, 15/16" Fast Spiral Car Reamer, 1" Fast Spiral Car Reamer, 1-1/16" Fast Spiral Car Reamer, 1-1/8" Fast Spiral Car Reamer, 1-3/16" Fast Spiral Car Reamer, 1-1/4" Fast Spiral Car Reamer, 1-5/16" Fast Spiral Car Reamer, 1-3/8" Fast Spiral Car Reamer, 1-1/2" Fast Spiral Car Reamer |
Need help choosing the right product?
Our product team can help you compare sizes, shanks, and applications before you order.