$40.99 Original price was: $40.99.$33.99Current price is: $33.99.
This X-CNC 1/4″ 2-flute square stub carbide end mill is a solid carbide, bright-finish upcut bit on a 1/4″ shank, made in the USA, for slotting, profiling and general cutting on desktop CNC. The length of cut is a short 1/2″ on a 2″ overall length, so the tool is stiffer than a longer 1/4″ end mill on a light machine. It fits machines that take a 1/4″ collet, including Shapeoko-class routers.
Family Owned. Slightly Twisted.
Real people who actually know drill bits pick up the phone.
Fast Shipping Nationwide
Most orders are out the door the same or next business day.
Built for Steel, Not Shelves
Shop-grade bits for people who drill all day and break stuff for a living.
Stumped? Call the Bit Experts.
Tell us the material and the job, and we'll get you the right bit. 800-350-8665.
This X-CNC 1/4″ 2-flute square stub carbide end mill is a solid carbide, bright-finish upcut bit on a 1/4″ shank, made in the USA, for slotting, profiling and everyday cutting on a desktop CNC. The square end leaves a flat floor. The two flutes clear chips. The length of cut is a short 1/2″ on a 2″ overall length, which is the point of a stub: less stick-out, more stiffness, less chatter on a light machine.
A longer 1/4″ end mill reaches deeper, and it also flexes more. On a desktop router or a small mill, that flex shows up as chatter, a tapered wall, or a broken tool. This stub keeps the cut close to the collet. If you need more than 1/2″ of flute in the work, this is the wrong length. At DrillBitWarehouse.com we are just a BIT more twisted about selling the short tool when the short tool is the smarter one.
Use it as a 1/4″ upcut in wood, sign material, plastics, and general-purpose milling in aluminum, steel or iron with conservative feeds. It is a general-purpose bright 2-flute, not a dedicated aluminum-geometry tool. For regular aluminum work, use the X-CNC 1/4″ 2-flute ZrN aluminum end mill. For a clean top face in wood or laminate, use the X-CNC 1/4″ downcut router bit.
The shank is 1/4″. It fits a 1/4″ collet on desktop CNC routers and small mills, including Shapeoko-class machines with a 1/4″ collet. It will not fit a 1/8″ collet.
| Series | X-CNC |
| Cut diameter | 1/4″ (0.250″) |
| Shank | 1/4″ (0.250″) |
| Length of cut | 1/2″ (stub / short) |
| Overall length | 2″ |
| Flutes | 2 |
| End style | Square end, center cutting |
| Coating | Uncoated, bright |
| Material | Sub-micron grain solid carbide |
| Origin | Made in USA |
| Sold | Individually |
Seat the shank fully in a 1/4″ collet, short of the flutes. Use it as an upcut for slots and profiles, and keep the depth inside the 1/2″ length of cut. Wear eye protection.
Yes. It is a standard right-hand spiral 2-flute end mill, so it cuts as an upcut and pulls chips up and out of the slot. For a clean top face, use the 1/4″ downcut router bit.
It is a stub. The short flute keeps the cut close to the collet so the bit is stiffer on a desktop machine. If your pass needs more than 1/2″ of flute, choose a longer tool.
Yes, if your machine has a 1/4″ collet. The shank is 1/4″. It will not fit a 1/8″ collet.
Yes, for general cuts with a clear chip path and conservative feeds. For aluminum as the main job, use the X-CNC 1/4″ 2-flute ZrN aluminum end mill, which has the 35° aluminum geometry and a ZrN coating.
Just a BIT more twisted. Questions? Call 1-800-350-8665.
Need help choosing the right product?
Our product team can help you compare sizes, shanks, and applications before you order.