X510 Carbide Picatinny Slot Cutter .2125″ 3 Flute

SKU: CA-104474

Made in USA

Original price was: $141.99.Current price is: $122.99.

Solid carbide Picatinny slot cutter with 3 helical flutes, .2125″ diameter, .1234″ length of cut and .005″ corner radius on a 1/4″ shank. It finishes MIL-STD-1913 cross slots to width and depth in one pass on rails, handguards, scope mounts and other gun parts. Sold individually.

Family Owned. Slightly Twisted.

Real people who actually know drill bits pick up the phone.

Fast Shipping Nationwide

Most orders are out the door the same or next business day.

Built for Steel, Not Shelves

Shop-grade bits for people who drill all day and break stuff for a living.

Stumped? Call the Bit Experts.

Tell us the material and the job, and we'll get you the right bit. 800-350-8665.

This X510 Picatinny slot cutter is a short, rigid rail groove finisher sized to the cross slots of a 1913 rail. Firearm component shops use it as a Picatinny rail slot cutter on uppers, handguards, scope bases and accessory mounts, and as a MIL-STD-1913 slot cutter when a print calls out the standard. It is solid carbide with 3 helical flutes, a .2125″ cutting diameter, a .1234″ length of cut, a .005″ corner radius, a 1/4″ shank and a 2.0″ overall length.

Cutting diameter .2125″
Flutes 3, helical
Length of cut .1234″
Corner radius .005″
Shank 1/4″ (.25″)
Overall length 2.0″
Coating Uncoated (bright)
Material Solid carbide

What it does

The 1913 standard calls for slots .206″ wide (+.008″/-.000″), .118″ deep, on .394″ centers. This tool is built around those numbers. The .2125″ diameter lands inside the .206″ to .214″ width band, and the .1234″ length of cut is just past the .118″ slot depth, so the flutes do the full depth of the slot and nothing more. The short flute length also keeps the tool very stiff, which helps hold width along a long rail.

Why the geometry matters

The helical flutes shear the chip out of the slot instead of plowing it. The .005″ corner radius protects the corners of the cutting edge from chipping and leaves a small radius at the bottom of each slot rather than a sharp internal corner, which is easier to anodize evenly and less likely to hold a burr.

Where it is used

It is commonly used on CNC vertical machining centers for the finish pass on receiver rails, free-float handguards, gas blocks, scope bases and accessory mounts, most of them 6061-T6 or 7075-T6 aluminum. Muzzle device and mount makers that produce 1913 rail sections cut the same slot. DrillBitWarehouse.com has supplied cutting tools to every branch of the U.S. military, and this cutter is part of a line built for gun parts manufacturers, armorers and rail makers.

Running it

A published starting point is 12,000 RPM at 150 IPM; run higher only on a rigid setup. Rough the slots first with the .200″ X510 roughing end mill, then finish with this tool.

Sold individually.

Frequently asked questions

Does this cut the whole rail profile? No. It cuts the cross slots (recoil grooves). The dovetail-style rail profile is a separate form tool.

Why is the length of cut only .1234″? MIL-STD-1913 slots are .118″ deep. A short flute just past that depth keeps the tool rigid and holds slot width.

Do I still need a roughing tool? For production work, yes. Rough with the .200″ X510 roughing end mill and finish with this cutter.

Will it work on a Weaver rail? Weaver slots are narrower than 1913 slots, so this .2125″ tool is sized for Picatinny. Check your print before using it on anything else.

Will it cut steel, stainless or titanium mounts? A work material rating is not published, and it is uncoated. It is commonly run in 6061-T6 and 7075-T6 aluminum. Call us before using it on steel, 17-4 stainless or titanium.

Questions on fit, material or setup? Call 800-350-8665.

Additional information

Need help choosing the right product?

Our product team can help you compare sizes, shanks, and applications before you order.

You may also like

Carbide 13pc Jobber Drill Bit Set
-16%

Original price was: $343.88.Current price is: $289.29.

4 Flute Single End Carbide End Mill
-56%

Price range: $10.91 through $349.85