X520 Carbide Charging Handle End Mill .420″ Clearance .83″ Reach

SKU: CA-100473

Original price was: $121.99.Current price is: $105.99.

Solid carbide 3 flute AR-15 upper receiver end mill for the charging handle clearance cut, .420″ diameter with a .25″ length of cut, .83″ reach and 7/16″ shank. Rifle and gun parts manufacturers use it to cut the channel the charging handle rides in without the tool body rubbing finished walls. Sold individually.

Family Owned. Slightly Twisted.

Real people who actually know drill bits pick up the phone.

Fast Shipping Nationwide

Most orders are out the door the same or next business day.

Built for Steel, Not Shelves

Shop-grade bits for people who drill all day and break stuff for a living.

Stumped? Call the Bit Experts.

Tell us the material and the job, and we'll get you the right bit. 800-350-8665.

This X520 AR-15 upper receiver end mill cuts the clearance the charging handle needs to travel in an AR-15 style upper. Receiver makers know it as a charging handle clearance end mill, and it sits in their upper receiver tooling next to the X520 lock form tool, the other charging handle end mill in the series. It is a solid carbide 3 flute end mill with a .420″ cutting diameter, a .25″ length of cut, .83″ of reach, a 7/16″ shank and a 3.0″ overall length.

Cutting diameter .420″
Flutes 3
Length of cut .25″
Reach .83″
Shank 7/16″ (.4375″)
Overall length 3.0″
Coating Uncoated (bright)
Work materials Steel, non-ferrous
Material Solid carbide

What it does

The charging handle rides in a channel along the top rear of the upper receiver and pulls the bolt carrier back. This tool cuts the clearance for it. Because it has a .420″ head on a reduced neck, it can get down into that channel and cut the walls without the body of the tool rubbing what has already been machined. Shops building uppers for short-barreled and hard-use rifles pay close attention to this area, since gas-reducing and ambidextrous charging handles all have to fit the same channel.

Why the geometry matters

A short .25″ length of cut with .83″ of reach is a stiffer setup than a long-flute end mill of the same diameter. Only the head is in the cut, so chatter is lower and the walls stay straight at depth.

Where it is used

It is commonly used on CNC vertical machining centers by firearm component manufacturers running forged and billet AR-15 uppers, usually 7075-T6 or 6061-T6 aluminum, and it is listed for steel and non-ferrous work. DrillBitWarehouse.com has supplied cutting tools to every branch of the U.S. military, and the X520 tools are aimed at receiver makers, gun parts shops and armories that run uppers in volume.

Running it

A published starting point is 7,000 RPM at 65 IPM. Higher speeds need a rigid setup. A short gauge length in a 7/16″ end mill holder, collet or shrink-fit holder helps the reach work in your favor.

Sold individually.

Frequently asked questions

Which receiver feature does it cut? The charging handle clearance in an AR-15 style upper receiver.

Will it fit an AR-10 / .308 upper? It was designed for the AR-15 upper. AR-10 pattern uppers vary by maker, so check the charging handle channel on your print first.

Will gas-reducing or ambidextrous charging handles still fit the channel it cuts? It cuts the standard AR-15 clearance, and aftermarket charging handles are built to fit a standard channel. If your design changes the channel, check the .420″ diameter against your print.

Why a 7/16″ shank? The shank is sized to the head, so you get a rigid tool with .83″ of reach. Use a 7/16″ collet, end mill holder or shrink-fit holder.

Can I run it in steel, stainless or titanium uppers? It is listed for steel and non-ferrous work. For 17-4 or other stainless, titanium or a hardened steel, call us with the grade and hardness before you order.

Questions on fit, material or setup? Call 800-350-8665.

Additional information

Need help choosing the right product?

Our product team can help you compare sizes, shanks, and applications before you order.

You may also like

Carbide 13pc Jobber Drill Bit Set
-16%

Original price was: $343.88.Current price is: $289.29.

4 Flute Single End Carbide End Mill
-56%

Price range: $10.91 through $349.85