29pc Solid Carbide Drill Bit Set – Straight Flute XF29

29pc CARBIDE Straight Flute Drill Bit Set XF29

“MASTER SET of the YEAR for Hard Metals”
If this drill was used in the Italian Job, they would have had the safe open in less than a minute!

MADE IN USA

The 29-piece Sub-micron Carbide Straight Flute set, CGDF Treated, is meticulously designed for precision. Each drill bit features a 140° notched split point, which ensures superior cutting efficiency and stability. This set is capable of producing reamer-type finishes, delivering exceptionally smooth and precise holes. Used for super hard abrasive applications.

Great for Drilling Heat Treated Stainless, Chrome Alloys, Nickel alloys, Boron, Titanium, Inconel, and other exotic materials.

THE ULTIMATE SET USED BY PROFESSIONALS

29-PIECE COMPLETE SET – USA MADE

Specifically designed for super edge strength.

YOU HAVE USED THE REST, NOW OWN THE BEST!

These are the drill bits for hardened steel when HSS and cobalt won’t cut it. This 29pc solid carbide drill bit set runs from 1/16″ to 1/2″ by 64ths and is built for drilling hardened steel from 42 to 65 RC. They’re the go-to drill bits for broken bolts, snapped taps and broken extractors. They also work as drill bits for stainless steel, titanium and Inconel, and for drilling hard metal that dulls standard bits. The straight flute carbide drill bits have a 140° notched split point that starts clean without walking. Every bit is made in the USA and kept in a steel index case.

Specifications

Designed for:

• Hardened steel (42–65 RC)
• Broken bolt and extractor removal
• Stainless steel and chrome alloys
• Titanium, Inconel, and nickel alloys
• Cast iron and abrasive materials

FEATURES

• Straight flute design for maximum rigidity
• 140° notched split point for controlled entry
• Sub-micron C2 solid carbide
• Reamer-quality hole finish
• CGDF treated for enhanced wear resistance

Set Includes: 29pc Terminator XF29 Size Chart

Other sizes available up to 3/4″ in diameter. Call us at 800-350-8665.

Applications

• Broken bolt and extractor removal: drill out broken bolts, studs and snapped extractors.
• Hardened and heat-treated steel: drill steels from 42 to 65 RC.
• Stainless, chrome and nickel alloys: heat-treated stainless, titanium, Inconel and other exotic materials.
• Cast iron and abrasive materials: hold an edge in materials that wear down HSS and cobalt.
• Precision holes: reamer-type finishes with a +0.0000 / -0.0005 tolerance.

Usage Tips

• Carbide is very hard but brittle. Use a rigid setup, such as a drill press, mill or lathe, with the work clamped.
• Keep the drill straight. Side load or rocking can chip or snap the bit.
• Keep runout low and the bit short in the chuck.
• Keep a steady feed. Letting the point rub in hardened steel dulls the edge.
• Use coolant or cutting fluid.
• For speeds and feeds on your material, call us at 800-350-8665.

Why Buy From DrillBitWarehouse.com

Formerly sold as Terminator Carbide, our carbide drills are now the X Series: XF for straight flute and XNF for twist drills. We stock Terminator XF straight flute carbide drill bits individually in fractional, number, letter and metric sizes, plus the XF13 and XF115 sets, so you can replace a single size or build out a full set.

WHY XF SERIES

XF Series represents straight flute carbide drills built for strength, precision, and control in hard materials. When twist drills fail or wander, XF drills maintain stability and produce clean, accurate holes.

THE BEST DRILL SET FOR WORK-HARDENED METALS. PERIOD.

MADE IN USA

– Coolant and Cutting Fluid Recommended

Questions? Call us, we know drill bits: 800-350-8665

More X Series Carbide Drill Bits

• Terminator XF Straight Flute Carbide Drill Bits, Fractional (sold individually)
• 13pc Solid Carbide Drill Bit Set, Straight Flute XF13
• 115pc Carbide Straight Flute Drill Bit Set, XF115
• XNF29 Carbide Twist Drill Bit Set (for non-ferrous metals and cast iron)
• All Carbide Drill Bit Sets