Armory X500 Carbide Tooling for Gun Builders and Gun Part Makers

Gun parts are unforgiving. A Picatinny slot that opens up a few thousandths too wide will let a mount rock. A charging handle channel that is tight in the wrong place will drag. The new Armory X500 line from DrillBitWarehouse.com is solid carbide tooling sized to those features, built for gun builders and gun part makers: receiver shops, rail and handguard makers, mount manufacturers, and shops cutting monocore chambers, baffle pockets and other deep pocket aluminum work to a print.

The first tool is already live: the X510 Carbide Picatinny Slot Cutter .2125″ 3 Flute (SKU CA-104474). The rest of the X510 rail groove, X520 charging handle and X530 long reach tools are being listed now. If you need one before those pages go up, call 800-350-8665.

A U.S. Air Force A-10C Thunderbolt II silhouetted on the flight line at dusk at Davis-Monthan Air Force Base, Arizona
A U.S. Air Force A-10C Thunderbolt II on the flight line at Davis-Monthan Air Force Base, Ariz., April 27, 2015. U.S. Air Force photo by Staff Sgt. Angela Ruiz. Public domain.

What the Armory X500 line is

Armory is not a bin of general-purpose end mills with a new label. Each tool in the X500 series is ground for a real cut on a gun part: MIL-STD-1913 cross slots on rails and handguards, the charging handle channel and lock position on an AR-15 style upper, magazine wells and trigger pockets in a lower, and the deep chambers and baffle pockets that show up in aluminum monocore and mount work.

Most of that work is 6061-T6 or 7075-T6 aluminum on a CNC vertical machining center. The tools are solid carbide, made in the USA, and sold individually. Most of the line is uncoated (bright). Starting speeds and holder notes are on each listing. If you are leaving aluminum for steel, 17-4 stainless, titanium or other alloys, call us first. A work material rating is not published on most of these tools. The exception is the X520 .420″ charging handle clearance end mill, which is listed for steel and non-ferrous work.

Shops that cut these features work to a print, and the dimension has to hold on the last part of the run the same way it held on the first. That is the standard behind the cutting tools DrillBitWarehouse.com has supplied to every branch of the U.S. military, and it is the standard the Armory line is stocked to meet for gun parts manufacturers, armorers and rail makers.

U.S. Army M1A2 Abrams tanks on patrol in a city street in Tall Afar, Iraq
U.S. Army M1A2 Abrams tanks on a combat patrol in Tall Afar, Iraq, Feb. 3, 2005. U.S. Air Force photo by Staff Sgt. Aaron Allmon. Public domain.

X510: Picatinny slots and rail grooves

A 1913 rail is more than a shape. The cross slots, also called recoil grooves, are what locks a mount, optic or accessory in place. MIL-STD-1913 calls for those slots .206″ wide (+.008″/-.000″), .118″ deep, on .394″ centers, so a finished slot has to land between .206″ and .214″. The X510 tools are built around those numbers. They cut the cross slots only. The dovetail-style rail profile is a separate form tool.

For production work, the line is a two-tool process. The X510 .200″ Picatinny slot roughing end mill is a short, stiff 3 flute carbide rougher with a wiper flat, a .25″ length of cut, a 1/4″ shank and a 2.0″ overall length. At .200″ it cuts each slot slightly under the minimum width and wipes the floor clean as it feeds. A published starting point is 12,000 RPM at 100 IPM.

The finish pass is a .2125″ tool, because that diameter sits inside the .206″ to .214″ width band. There are two finishers. The X510 .2125″ rail groove finishing end mill is a 3 flute carbide tool with a .2″ length of cut, a 1/4″ shank and a 2.5″ overall length. After the rougher has done the heavy work, it only takes about .006″ per wall, which helps it hold width along a long handguard or rail. A published starting point is 12,000 RPM at 150 IPM.

The other finisher is the live X510 Picatinny slot cutter: 3 helical flutes, a .2125″ diameter, a .1234″ length of cut, a .005″ corner radius, a 1/4″ shank, a 2.0″ overall length, uncoated solid carbide. The short flute is just past the .118″ slot depth, so the tool does the full depth and nothing more, and stays rigid enough to hold width. The helical flutes shear the chip out of the slot instead of plowing it. The small corner radius protects the cutting edge and leaves a radius at the bottom of the slot that is easier to anodize evenly and less likely to hold a burr. A published starting point is 12,000 RPM at 150 IPM. Rough first, then finish with this cutter. It is commonly run in 6061-T6 and 7075-T6 aluminum on receiver rails, free-float handguards, gas blocks, scope bases and accessory mounts. It is sized for Picatinny, not Weaver. Weaver slots are narrower, so check your print before using it on anything else.

X520: Charging handle work on AR-15 style uppers

The charging handle has to travel and then lock. The X520 pair splits that job into two tools, both aimed at AR-15 style upper receivers in 7075-T6 or 6061-T6 aluminum, run on a CNC vertical machining center.

The X520 .420″ charging handle clearance end mill cuts the channel the handle rides in along the top rear of the upper. It is a solid carbide 3 flute tool with a .420″ cutting diameter, a .25″ length of cut, .83″ of reach, a 7/16″ shank and a 3.0″ overall length, uncoated, and listed for steel and non-ferrous work. The reduced neck is the point: the head can get down into the channel and cut the walls without the body of the tool rubbing what has already been machined. A short .25″ length of cut on .83″ of reach is a stiffer setup than a long-flute end mill of the same diameter. A published starting point is 7,000 RPM at 65 IPM, in a 7/16″ collet, end mill holder or shrink-fit holder with a short gauge length. It was designed for the AR-15 upper. AR-10 pattern uppers vary by maker, so check the charging handle channel on your print first.

The X520 .300″ charging handle lock form end mill cuts the seat the latch catches on when the handle goes home, and it puts the chamfer on in the same pass. It is solid carbide with 3 flutes, a .300″ cutting diameter, a .75″ length of cut, a .08″ x 45° chamfer, a 5/16″ shank and a 2.0″ overall length, uncoated. Because the 45° edge is ground into the tool, you do not need a separate chamfer pass. A published starting point is 12,000 RPM at 60 IPM, held in a 5/16″ collet or shrink-fit holder with minimal stickout. It cuts a fixed shape, so compare the .300″ diameter and .08″ x 45° chamfer to your print before you order.

Two U.S. Air Force F-22 Raptors in flight near Guam
U.S. Air Force F-22 Raptors assigned to the 90th Fighter Squadron, Elmendorf Air Force Base, Alaska, fly near Guam, Feb. 16, 2010. U.S. Air Force photo by Staff Sgt. Jacob N. Bailey. Public domain.

X530: Deep pockets, monocores and baffle pockets

Some cuts are just deep. A magazine well, a fire control pocket, a monocore chamber milled across aluminum bar, or a narrow baffle pocket will bury a standard end mill until the shank rubs the walls. The X530 tools put the reach in a relieved neck behind a short flute, with a corner radius for heavy roughing in aluminum. Both are roughers. Finish with a separate pass, or a magazine well broach on a lower. Both are uncoated, high-feed aluminum designs. They are suited to 7075 and 6061 aluminum. They are not published for 17-4 stainless, titanium or Inconel. Call us before using them on those alloys.

The larger X530 is a 5/8″ 3 flute long reach corner radius end mill with a 35° helix, a 1.625″ length of cut, 2.625″ of reach behind a .59″ neck, a .02″ corner radius, a 5/8″ shank and a 5.0″ overall length. It is built to rough the magazine well in an AR-15 style lower, the deepest opening in that receiver, and the same reach suits it as a monocore end mill for deep chambers cut across aluminum bar, often 1.5″ in diameter or larger. The .59″ neck is relieved just under the cutting diameter, so the tool clears the walls it has already cut as it goes deeper. The .02″ radius leaves a small fillet instead of a sharp corner where a chamber wall meets the floor. A published starting point is 12,000 RPM at 250 IPM, with ramp entry up to 45° depending on setup. At this reach, a shrink-fit or hydraulic holder with good runout is the right idea.

The smaller X530 is a 3/8″ 3 flute long reach corner radius end mill with a .5″ length of cut, 1.25″ of reach, a .015″ corner radius, a 3/8″ shank and a 3.0″ overall length. It is built to rough the trigger pocket, also called the fire control pocket, in an AR-15 style lower, and that same size and reach suit it as a baffle pocket end mill on 7075 aluminum baffles and small cores. Pockets in a 1″ to 1.5″ core are narrow and deep. A 3/8″ head with 1.25″ of reach can work them from one side, or from both sides when the bar is rotated 180° between pockets. A published starting point is 12,000 RPM at 200 IPM, with ramp entry up to 45°, in a 3/8″ collet or shrink-fit holder with short stickout.

Four U.S. Air Force F-35A Lightning II aircraft in formation over the northwest coast of Florida
U.S. Air Force F-35A Lightning II aircraft assigned to the 58th Fighter Squadron, 33rd Fighter Wing, in formation over the northwest coast of Florida, May 16, 2013. U.S. Air Force photo by Master Sgt. John Nimmo Sr. Public domain.

Armory X500 FAQ

What is the Armory X500 line?

It is DrillBitWarehouse.com’s USA-made solid carbide series for gun builders and gun part makers. X510 covers Picatinny rail grooves and slot cutting, X520 covers charging handle clearance and lock form work on AR-15 style uppers, and X530 covers long reach corner radius roughing for magazine wells, trigger pockets, monocore chambers, baffle pockets and other deep pocket aluminum work.

Does the Picatinny slot cutter cut the whole rail profile?

No. The X510 Picatinny slot cutter cuts the cross slots, or recoil grooves. The dovetail-style rail profile is a separate form tool.

Do I need to rough and finish 1913 slots with two tools?

For production work, yes. Rough with the .200″ X510 roughing end mill, then finish with a .2125″ tool: either the X510 rail groove finishing end mill or the X510 Picatinny slot cutter. Splitting the cut means the finisher only takes a few thousandths per wall, so it deflects less and holds width along a long rail or handguard.

Which tool cuts the charging handle channel, and which cuts the lock?

The X520 .420″ clearance end mill, with .83″ of reach, cuts the channel the charging handle rides in. The X520 .300″ lock form end mill, with the .08″ x 45° chamfer, cuts the lock position and its chamfer in one pass. They are commonly run as a pair on AR-15 style uppers.

What are the X530 long reach tools for?

The 5/8″ X530 roughs AR-15 magazine wells and is also suited to monocore chambers, baffle stacks and other deep pocket aluminum work that a standard 5/8″ end mill cannot reach. The 3/8″ X530 roughs trigger, or fire control, pockets and is also suited to baffle pockets and small monocore chambers in 7075 aluminum. Both are roughers, not finishers.

Will these tools cut steel, stainless or titanium?

Most of the line is commonly run in 6061-T6 and 7075-T6 aluminum, and a work material rating is not published for steel, 17-4 stainless or titanium. Call us before using those tools on those materials. The X520 .420″ charging handle clearance end mill is the one listed for steel and non-ferrous work; still call us before 17-4, titanium or a hardened steel.

Are these CNC tools, or can I run them in a mill at the bench?

They are made for CNC vertical machining centers. The published starting data is in that range, for example 12,000 RPM on the slot tools and the X530 roughers. If your setup is different, call 800-350-8665 and we will talk through it.

Questions about Armory tooling, a print or a setup? Call 800-350-8665. DrillBitWarehouse.com, just a BIT more twisted.

Share this article

More guides

Black cylindrical drill bit holder containing multiple gold and black twist drill bits of varying sizes on white.
AUTO PARTS
The right drill bit set makes a difference in every workshop. Explore what to look for when selecting reliable bits for accurate, consistent drilling results.
Close-up of eight metal rotary cutting burrs in a black holder inside a blue case, featuring varied head sizes and shapes.
AUTO LABOR
A dependable drill bit set starts with the right selection. Compare important features for occasional DIY use and more demanding professional applications.
Why Cobalt Drill Bits Are Preferred for Automotive Work
AUTO PARTS
Get more from your automotive drilling tools. Learn when cobalt drill bits make sense for tough metals and how their design supports consistent performance.